|
|
|
|
|
|
|
|
|
|
|
Push-On Saliva Ejector Tip. This tip is a push-on, pull-off type.
NOTE: Make sure what type saliva ejector you have BEFORE ordering. If it does not come off with a gentle tug, it is NOT a push-on tip.. Order Screw-On tip #5752
|
HEAVY DUTY PLASTIC BOTTLE, 2L
|
NOTE: Avoid using disinfectant sprays or wipes. They can dry out plastics and cause them to become brittle, foggy and cracked.
|
|
|
|
|
|
|
|
|
|
|
|
|
Belmont PN# 8000 2005
NOTE: Avoid using disinfectant sprays or wipes. They can dry out plastics and cause them to become brittle, foggy and cracked.
|
NOTE: Avoid using disinfectant sprays or wipes. They can dry out plastics and cause them to become brittle, foggy and cracked
|
Toggle Valve Assembly for Wet/Dry FOOT CONTROLS, 3 way valve. Kit includes new toggle, pin and retainer spring Tip: When replacing the toggle take not of the position of the base of the toggle so that when operating it, the toggle faces the correct position for ON and OFF
|
|
|
|
|
|
|
|
|
|
|
|
|
Does your Air/Water syringe leak out of the nosecone? Does your syringe separate Air & Water completely? This O-ring may be the problem. Fits DCI Quick Change Tip Syringes, includes pack of 12 O-rings.
|
Kit includes: 1 push button & 1 conical spring
|
1/4" OD Male X 1/4" Poly with shutoff
|
|
|
|
|
|
|
|
|
|
|
|
|
HEAVY DUTY PLASTIC BOTTLE, 2L
|
12 Volt AC / 55 Watt
Fits ; ADEC performer / Ampco Contender, Fiad / Healthco / SDS Fantastic Belmont / Celux / Chayes Virginia / DCI Pro 70 / Marus Pro 72
CAUTION: DO NOT TOUCH BULB WITH YOUR FINGERS. Always make sure you are using the correct bulb.
|
Fits Pelton & Crane LF II
NOTE: Avoid using disinfectant sprays or wipes. They can dry out plastics and cause them to become brittle, foggy and cracked
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" OD Female X 1/4" Poly with shutoff Includes : both YELLOW & BLUE indicators
|
Redesigned to include notches for the bulb housing
NOTE: Avoid using disinfectant sprays or wipes. They can dry out plastics and cause them to become brittle, foggy and cracked
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Pelton & Crane LF II For use on LF II Yoke & Frame Assembly Replaces existing worn bushings Slot for 5/8" wrench New High Temperature material
|
Screw-On Saliva Ejector Tip. This tip will not pull-off or fall off.
NOTE: Make sure what type saliva ejector you have BEFORE ordering. If it comes off with a simple tug, It Is NOT a Screw-On Tip. Order Push-On Tip #5754
|
17Volt AC / 95Watt BULB for ADEC, Midmark and Forest Operatory Lights NOTE: Always Check Volts and Watts on bulb BEFORE installation
CAUTION: DO NOT TOUCH BULB WITH YOUR FINGERS. Always make sure you are using the correct bulb.
|
|
|
|
|
|
|
|
|
|
|
|
|
24 Volt AC / 150 Watt
FITS: DentalEZ Distinction / Forest, Faro Cool Beam / Henry Schein / Knight / Marus / Old Forest / Porter Daystar, Ritter K / Vacudent
CAUTION: DO NOT TOUCH BULB WITH YOUR FINGERS. Always make sure you are using the correct bulb.
|
25 Volt AC / 150 Watt
CAUTION: DO NOT TOUCH BULB WITH YOUR FINGERS. Always make sure you are using the correct bulb.
|
Replacement for Cascade 500/ 6300 Halogen Lights Coated for easier cleaning and protection
HINT: Avoid using disinfectant sprays or wipes on plastic parts, they can dry out the plastic and cause them to become brittle, foggy and cracked
|
|
|
|
|
|
|
|
|
|
|
|
|
Bracket Assembly, Surf Color, (Pkg of 2)
HINT: Avoid using disinfectant sprays or wipes on plastic parts, they can dry out the plastic and cause them to become brittle, foggy and cracked
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits DCI Quick Change Tip Syringes. Includes: 1 tip adapter, 1 tip adapter spring, 1 tip adapter pin, 1 syringe head O-ring, 1 5/32" hex wrench
|
12" Leads Ceramic Socket
|
This STANDARD set is made of high torque steel. Black corrosion-resistant finish. Long arm series. Has "Ball End" get into tight spaces up to 25 degrees. Made is USA
|
|
|
|
|
|
|
|
|
|
|
|
|
This METRIC set is made of high torque steel. Black corrosion-resistant finish. Long arm series. Has "Ball End" get into tight spaces up to 25 degrees. Made is USA
|
24 Volt / 60 Watt BLACK Tip
CAUTION: DO NOT TOUCH BULB WITH YOUR FINGERS. Always make sure you are using the correct bulb. The BLACK tip means 24 Volt. There are 12 Volt bulbs that are similar but without the BLACK tip. Using the 12 volt bulb will immediately burn out !
|
This two-in-one tool will help to install the white nylon sleeves over tubing connections. One end is 1/8" and the other is 1/4"
|
|